Chenbro SK32303 Installation Guide with 3Gb/s SATA/SAS Bac Bedienungsanleitung PDF herunterladen (Seite 13)

SK32303 ver. A1

User’s Manual

www.chenbro.com

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]w

HDD Activity Signal Jumper

The default jumpers are installed for SATA-II (3.0 Gb/s) HDDs which support activity signal via pin-11 of the

connector on HDD.

If using SATA-I (1.5 Gb/s) HDD, remove the jumper for HDD 1, 2 or 3 and connect the activity signal

connectors on SK32303 backplane and RAID card to activate the HDD activity LED. The RAID card must

support the HDD activity signal such as 3ware 8000 & 9000 series.

Default setting for SATA-II HDD

Setting for SATA-I HDD (SK32303 Backplane)

Setting for SATA-I HDD (RAID Card)

Connect the 4-pin HDD LED cable to the CATHODE of the HDD activity connector on RAID card. Refer to

your RAID card’s user manual for the detailed pin definition.

HDD 3

HDD 2

HDD 1

HDD 2

HDD 3

HDD LED Cable: 26H113215-005

1 2 ... 8 9 10 11 12 13 14 15 16 17

Keine Kommentare

Chenbro SK32303 Installation Guide with 3Gb/s SATA/SAS Bac Bedienungsanleitung Seite 13